Opis
Packaging net weight: 20Kg.
ELASTYCZNY polimocznik na zimno.
Ręcznie aplikowany. Hydroizolacja tarasów, basenów, zbiorników, chodników, dla pieszych, oczyszczalni, parkingów, pod terrazzo, płytki, kafelki itp. Dla ruchu pieszych o dużym natężeniu.
FLEXIBLE polyurea based membrane, for manual and airless gun application, with high performance and waterproofing
Cold polyurea is used in the waterproofing of roofs, terraces, swimming pools, water tanks, roofs with heavy traffic and buildings where total waterproofing is required.
Its excellent waterproofing properties and high adhesion to the substrate make it especially suitable for preventing the water penetration, corrosion and frost; it has also good chemical resistance to acids and alkalis.
Its easy manual application make it suitable for either hot polyurea repairs or new construction.
POLIUREQ C 601 F is self-leveling for flat and regular surfaces. For slopping or vertical surfaces (walls) it is recommended to add between 0.5% and 1.5% of AD RHEOLÓGICO POLYUREA or to apply in 2 or 3 layers of 0.200 kg/m2 each. Since it is an aromatic polyurea, it must be protected from UV rays to avoid yellowing with EQPOL 40 FLEX aliphatic polyurethane paint (aliphatic topcoat).
Waterproofing of decks, terraces, balconies and roofs.
Waterproofing of sports grounds and stands.
Waterproofing of swimming pools, ponds, water parks.
Waterproofing of water tanks.
Waterproofing of waste water.
Waterproofing of roofs and walkable roofs with heavy traffic.
Waterproofing and protection of concrete.
Waterproofing of inverted roofs, garden roofs
Waterproofing of under terrazzo and ceramic or Catalan tiles
Waterproofing of outdoor parking (consult technical department and follow additional recommendations of the PARKING SYSTEM).
POLIUREQ C 601 F is part of the following systems:
POLIUREQ C SYSTEM SWIMMING POOL AND AQUATIC FACILITIES
TRANSFERABLE ROOF SYSTEM (heavy traffic)
INVERTED, LANDSCAPED OR CERAMIC ROOF SYSTEM
OUTDOOR PARKING SYSTEM
Please contact our Technical Service (+48) 881 911 999 for any application not included in this list of Systems.
Protective finish of POLIUREQ C 601 F:
It is coated in order to increase its chemical-mechanical and UV resistance.
The usual finishing and protection layers are:
- PISCISPUR : For waterproofing of swimming pools
- EQPOL 40 FLEX : For waterproofing of walkable roofs – heavy traffic use and parking finish. (Consult our Technical Department)
Please contact our Technical Service (+48) 881 911 999 for any application not included in this list of Systems.
- Forms a flexible waterproof membrane, with no overlaps or welds.
- Excellent crack bridging capacity.
- Easy application by trowel or harrow (roller applications may require more coats than necessary to achieve the required thickness).
- Solvent free.
- Once cured the membrane has excellent mechanical properties.
- Puncture resistance.
- Water resistant (long-term exposures).
- Fully adhered system.
- Coverable after a few hours.
- Remains flexible at low temperatures (-30ºC).
- Thermally stable, does not soften at high temperatures.
- Non-slip (Sprinkle AD NONSKID 520).
- Walkable with good comfort.
- Frost resistant.
- Global Migration below the limits established in article 12 of EU Regulation 10/2011 on plastic materials and objects intended to come into contact with foodstuffs.
Elongation at break: 70%
Tensile strength: 8.59 MPa
Abrasion resistance: 470 mm 3
Shore A/D hardness: 80/40
